Installation for the production of synthetic fiber UPV-200, PET Flex, x-ray film, waste from disposable tableware, capacity up to 250 kg per day, average power consumption 2-3kV. h, dimensions 190 *120*70 cm, weight 170kg. the Uniqueness of our equipment is that by simple settings You can make the material you need density and thickness of the formation. The finished material can be used in the manufacture and sewing of blankets, clothing, and even, at a certain thickness and density as a building insulation. The entire manufacturing process is accompanied by photo and video shooting. The following documents are attached to the shipment: contract, additional agreements, if necessary, certificate of origin ST-1, customs Declaration, equipment passport, instructions. Maximum capacity 200 kg per day. Maximum power consumption in the mode of warm-up Q3-h in the heated operating state in the range of 1.5-2.5 sq h Also available as an optional formative installation - 250, the size of the finished layer of synthetic fiber 220*250, thickness and density of the resulting layer depends on the wishes of the client , depending on the scope of application( layer for blankets, building insulation) and is regulated independently. Power consumption is 1.5 sq h, dimensions 2,9*1,8*100 cm, weight 140 kg. Due to the increased demand for this equipment, it is possible to consider the option of cooperation in the implementation-production of our equipment in Your country.